The description :

Prima Foam is a single-component foam compound made of polyethylene. It is used for insulation and installation, filling gaps and defining edges. It dries at normal humidity. It is free of CFC and EG C.

Application: Closing and filling joints and partitions near wires, pipes and conduits on walls, ceilings and insulating panels.

Properties: Good adhesion to concrete, in addition to adhesion to bricks, plaster, rocks, wood, fiberglass, and many synthetic materials such as polystyrene, polystyrene foam, and PVC. Resistant to heat, water, and many chemicals.

Preparations: The surface must be clean, free of dust and grease, and the surface must not be wet to obtain a good result. The can must be shaken before use and the connector must be installed on the spray nozzle.

Usage: It can be used by pointing the spray can downwards, and with the help of the connector, the foam fills the required joints and the gaps are filled by only 50%. Foam must be used in architectural ornaments and wait an hour or two before applying a second layer in large joints, and the layer must be moistened between the layers.
*The package contains flammable materials that should not be sprayed directly on flames. The package contains compressed materials. They must be protected from direct sunlight and not exposed to a temperature of more than 50 degrees Celsius, even after use.